/>
Bear Woods Supply Logo Wood Craft Parts
Navigation

Adjustable Chime with Pendulum Movement (up to 5/8" thick dial)

Average rating:
average rating 100%
2 reviews
Explore all reviews
Quantity   1 - 2     3 - 4     5+  
Price CAD $99.00 CAD $96.00 CAD $92.50
Per Chime with Pendulum Clock Motor
Our Product Code: Q-59-S
Quantity: 
 
Checkout/Estimate Shipping
Share Share on Facebook Share on Pinterest

DISCLAIMER:

If you forget to add hands or the pendulum rod/bob and you'd still like the hands or rod and bob a SEPERATE shipping fee will apply.
We always recommend new hands, as older hands may not fit the American I Shaft design.



Quad Tubular Chime Movement with optional pendulum

Features 5 chiming options, on-off and night mode, plus an optional pendulum.  Suitable for a 5/8" thick clock face and works with our smaller clock hands under 5" length.  

This is a top of the line quartz clock movement with all the features our customers ask for.   

This clock movement has the sound of a tubular bell grandfather clock movement, with the convenience and the accuracy of a quartz movement. It operates on two C cell batteries, and has the largest speaker available of any chime movement - 3" in diameter! This movement will also operate perfectly well with or without a pendulum.

Choose a free or premium clock hand set from below.  We offer 28 options that are free - choose from below.

Click here to learn more about choosing the right clock movement and hands.

Note: this movement is only compatible with the QB-258 rod & bob set

Features

  • Simulates Tubular Bell Sound With Superior Quality from a remote speaker.
  • Multiple Chime Options
Mechanical Westminster
Ave Maria
Westminster Bell
Gong
4 Christmas songs (Wish You a Merry Christmas, Jingle Bells, Tis the Season, Rudolph the Red Nosed Reindeer)


Operations

  • 24 hour mode
  • Night silencer mode 10:15 pm - 5:45 am 
  • Off mode 
  • Can be used with or without Pendulum | Pendulum support may be removed 
  • Adjustable volume control
  • Operated on 2 x C cell Batteries 
  • American I shaft, fits hands under 5"
  • Option for 4x4 Chime (every 15 minutes) or 2 Chimes/Hour (hour count and strike on half hour)
Specifications Operating Voltage:  1.3V - 1,7 V | Battery type: 2 x C cell Batteries | Time Accuracy: +/- 30 sec/month at 1,5V DC | 25ºC unadjusted Torque at second hand: 0,6 (GF-CM) | Torque at minute hand: 3,6 (GF-CM) | Operation temp. range: -10ºC - +60ºC | Max Pendulum swing: 10º | Max Pendulum length: 42 cm / 16 1/2" | Max Pendulum Weight: 100g | Size 117 mm (W) x 124.6 mm (H) x 32 mm (D) | Size fractional 4 5/8" (W) x 4 7/8" (H) x 1 1/4" (D)​ 
 
* If you forget to add hands or the pendulum rod/bob and you'd still like the hands or rod and bob a separate shipping fee will apply.  We always recommend new hands, as older hands may not fit the American I Shaft design.  If you don't want the hands or Rod/Bob, please let us know by following the instructions below.
 
Choose your pendulum rod and bob with purchase Choose Free Clock Hands Replacing Clock Parts
Specifications

**When repairing a clock we always recommend new hands as your old ones may not fit.


  • Dimensions:4-3/4 inches wide x 4-1/2 inches high x 1-3/8 inches deep
  • Overall Shaft Length:1-1/4"
  • Threaded Shaft Diameter:5/16"
  • Threaded Shaft Length: 11/16"
  • Runs on 2 C batteries
  • Runs hands up to 4-7/8" inches long
  • Works with Material up to 5/8" thick

  • The maximum capacity for pendulums on this movement is 100 grams (3-1/2 ounces).
  • Pendulums swing without battery power - using momentum and magnet. Keep your clock level and perpendicular to the ground for continuous pendulum motion. For a battered powered pendulum consider our Heavy Duty Pendulum Drive QB-DRV

  • Hardware Included

  • Brass Washer
  • Hex Nut
  • Open End Nut



  • Optional Hardware

    Add an Black Endcap for $0.50
    or Add an Endcap for $0.50

    Average rating:
    average rating 100%
    2 reviews

    Click Here to Write a Review Explore all reviews

    Featured positive reviews:

    average rating 100%
    Nice Sound! 2020-07-16
    By Steve Tomkiewicz
    My clock face in the grandfather clock was kind of thin, so I added a panel and went with the clock drive with the longer drive. It came without instructions and I could not get the time right. One email to Bear Woods and the problem was solved! To be honest, I’m still not entirely sure how I managed to get the time and hands synchronized, mostly blind luck, but without the instructions I would have been very frustrated. My wife wasn’t too keen at first about having such a large timepiece added to our living room, but after hearing the chimes for the first time she became a convert (she’s originally from the UK), and when I lowered the volume too much was asked to raise it back up some! The various chimes are nice, and we settled on the ones that chime only on the hour and selected night time off. Overall we are very happy with the results, and with Bear Woods prompt response, we’re talking a matter of a few hours- great customer service indeed! We left the pendulum drive in it’s locked position, as the design of the face and ‘weights’ required a separate drive for the pendulum, which means the two C cell batteries should last for years, giving me plenty of time to psyche myself up to replace and reset the hands and time! Better print those instructions out and keep them inside near the clock drive! I have no qualms about recommending Bear Woods as a supplier of very high quality clock drives, hands, and probably most importantly of all, great service.
    average rating 100%
    Second Hand 2020-07-16
    By Steve Tomkiewicz
    I wasn’t sure at first if I wanted a second hand on my grandfather clock, but I’m glad I went with one, as it fully compliments the other hands, and really adds something to the looks of the clock face. It installed easily and I am very happy with the results!
     
    How to Use

    Click here to learn about setting up this quartz movement.