Standard Clock Mechanisms, USA Made by Takane (fits up to 1/8" thick clock dial material)
USA Made Mini Quartz Clock Movement. Fits 3" Diameter Hole or Flush Mount. Step Second Hand. Runs on 1 (AA) Size Battery. Choose Premium or free clock hands (set includes hour and minute hand). ...
| Quantity | 1 - 9 | 10 - 49 | 50 - 99 | 100+ |
| Price | CAD $15.50 | CAD $12.75 | CAD $7.20 | CAD $6.00 |
| Per USA Made Clock Moto. Choose a set of free OR premium clock hands | ||||
Part #: Q-11
Mini Quartz Clock Movements for 1/8 inch thick dial face
These movements made in the US by Takane and work with hands under 5 inches long.
- Accurate Within 2 Minutes A Year
- 1 Year Warranty
- OK for outdoor use if sheltered from rain.
- American "I" Shaft.
Click just above on "Choose your hands" to choose your hands for this type of movement. There are about 25 free hand options available and many more for purchase.
Please note free hands are only available per each movement purchased and if not selected at time of purchase, there will be an extra shipping charge. Also note that hangers and the rubber washer are sold separately - find them at the same spot as where you choose your hands.
Need hands longer than 5 inches? Click here for high torque options
Reviews
Click Here to Write a Review | Explore all
AMAZING SERVICE
2016-10-18
Today I will be placing my forth order for 20 more clock mechanisms from Bear Woods Supply with 100% confidence that if there is any issue with the order, it will be dealt with immediately. Great company to purchase from. I make CD/DVD clocks with these mechanisms and they are going like hot cakes at craft shows in southern Ontario. These Movements come with everything I need except I have to purchase a larger washer as the centre hole in a printable CD/DVD case is too big for the washers included with these sets. Minor detail. With a great selection of clock hands in Black, White or Brass, you're sure to find the right combination for your project. To determine which size hands to get, measure from the centre of your clock face to where you would like the end of the hand to be. They can also be cut to length if you select the right style. The brass hands come with a protective plastic coating on them which is easily removed by simply taking a small piece of scotch tape, place it on the end of the hand and pull the very thin layer of plastic off. Another bonus - MADE IN USA - support north America. These movements can be found all over the place but you can't beat Bear Woods Supply Company for SERVICE. That is paramount.
Clock Movement
2016-04-08
I make clocks out of CD's by printing on the printable CD whatever the client wants. Because of the size of the CD hole, I had to purchase separate washers to hold the CD in place. Service was very fast and all clocks work great. The silver hangers that come with the clock, I paint black as it can be seen once item is fully assembled. The 1/8" thick clock dial is perfect to make a clock out of a CD. Very happy with products from Bear Woods - Highly recommended.
Delighted
2020-06-05
After struggling with purchasing the correct model of mechanism to repair an outdoor clock, I finally made my choice. It arrived within 2-days! I was unable to install the product. I called customer service with goal of exchanging my purchase. I was delighted because the agent guided me through the correct installation procedure and voilà, I had a functioning clock. Highly recommend them for clock parts.
replacement clock parts
2018-10-14
Project went well. There was enough information on the website to point the direction in both the necessary parts and how to install. Thank you!
The order process was simple and efficient. The whole project from conception to completion was done in a week! That speaks volumes about the attention to detail demonstrated by the supplier.
Super Happy - would order from again anytime
2020-03-03
Customer service was outstanding, with e-mails or phone calls at every turn of the order process, very genuine customer service. Would highly recommend them again. Going forward, their are my first stop in my search for items I order online. - Thank you
Clock Mechanisms
2018-11-07
Excellent product. I make clocks out of printable CD's/DVD's. A great Christmas gift idea. Delivery was before the scheduled time even during the rotating postal strike. You can't beat Bear Woods for customer service - the best I've ever experienced.
fast quick reliable
2019-08-24
Ordered replacement clock innards, works fine, very quiet, almost can't hear it ticking. Very pleased with prompt delivery.
I am totally inept at repairing things but this solved my dead carriage clock, rescued it. Thanks
reccent purchase
2017-05-29
Parts worked as advertised and arrived when stated.
The only problem I had was in fitting the mechanism to my clock body. The mounting shaft could have been a little bit longer (say 1/16th more) for my application.
Happy camper
2020-09-15
I was doing a 1980’s camper renovation & really wanted to keep the original, but broken, wall clock with the logo on it. This mechanism is a perfect fit, was easy to install & works well.
Happy Customer
2021-12-08
The clock movement is keeping perfect time. I was not sure how to attach the minute hand so I emailed Bear Woods. Shelby got back to me quickly and explained how. Great service!
Thank You
2018-05-07
Easy to navigate website, good product and good delivery adds up to a very good experience for the customer. No problem at all to recommend Bear Woods Supply.
No Hassle Transaction
2017-09-27
FINE real FINE...no hassle transaction, no problem ordering, shipping in perfect order and in time!!! nothing else to say but thank you very much
Good product
2020-06-25
Clock movement works as advertised. Was able to use the original hands - clock is as it was when we originally purchased it many years ago.
awesome
2018-10-14
perfect service , perfect product , perfect price ,,, couldn't be any better ,,,, unlike another unnamed site I dealt with previously !
happy
2022-07-03
I have not opened the package as my customer found the product was not needed, It was received on time, so I am happy.
Great selection
2015-04-24
I was able to order a variety of hands to go with the movements and the customer service was great. Thanks!
Very accurate
2020-06-28
The Takane clock movements are very accurate, easy to assemble and mount. they are well worth the cost.
Satisfied customer
2021-11-16
The first clock mechanism I received was defective but I received a replacement free of charges.
Clock mechanisms
2018-01-20
Very speedy delivery with quality products. I would deal with your company again. Good job.
Happy customer!
2023-03-27
Replaced old mechanism with the new one and it is working perfectly. No problems installing.
Satisfied
2020-07-23
Order was received as promised and is performing as expected. Good Job. Would recommend.
Clock mechanism
2019-05-20
Used to repair a clock. Fits perfectly and works perfectly
clock parts
2018-08-07
friendly over the phone detailed service
clock parts
2018-08-07
friendly over the phone detailed support
Clock motor
2018-08-22
Working well,
Thank you
happy customer
2022-12-22
Perfect fit
Clock device
2013-02-20
Excellent
Average rating:
27 reviews
Click Here to Write a Review | Explore all
Featured positive reviews:
Today I will be placing my forth order for 20 more clock mechanisms from Bear Woods Supply with 100% confidence that if there is any issue with the order, it will be dealt with immediately. Great company to purchase from. I make CD/DVD clocks with these mechanisms and they are going like hot cakes at craft shows in southern Ontario. These Movements come with everything I need except I have to purchase a larger washer as the centre hole in a printable CD/DVD case is too big for the washers included with these sets. Minor detail. With a great selection of clock hands in Black, White or Brass, you're sure to find the right combination for your project. To determine which size hands to get, measure from the centre of your clock face to where you would like the end of the hand to be. They can also be cut to length if you select the right style. The brass hands come with a protective plastic coating on them which is easily removed by simply taking a small piece of scotch tape, place it on the end of the hand and pull the very thin layer of plastic off. Another bonus - MADE IN USA - support north America. These movements can be found all over the place but you can't beat Bear Woods Supply Company for SERVICE. That is paramount.
I make clocks out of CD's by printing on the printable CD whatever the client wants. Because of the size of the CD hole, I had to purchase separate washers to hold the CD in place. Service was very fast and all clocks work great. The silver hangers that come with the clock, I paint black as it can be seen once item is fully assembled. The 1/8" thick clock dial is perfect to make a clock out of a CD. Very happy with products from Bear Woods - Highly recommended.
After struggling with purchasing the correct model of mechanism to repair an outdoor clock, I finally made my choice. It arrived within 2-days! I was unable to install the product. I called customer service with goal of exchanging my purchase. I was delighted because the agent guided me through the correct installation procedure and voilà, I had a functioning clock. Highly recommend them for clock parts.
Project went well. There was enough information on the website to point the direction in both the necessary parts and how to install. Thank you!
The order process was simple and efficient. The whole project from conception to completion was done in a week! That speaks volumes about the attention to detail demonstrated by the supplier.
Customer service was outstanding, with e-mails or phone calls at every turn of the order process, very genuine customer service. Would highly recommend them again. Going forward, their are my first stop in my search for items I order online. - Thank you
Excellent product. I make clocks out of printable CD's/DVD's. A great Christmas gift idea. Delivery was before the scheduled time even during the rotating postal strike. You can't beat Bear Woods for customer service - the best I've ever experienced.
Ordered replacement clock innards, works fine, very quiet, almost can't hear it ticking. Very pleased with prompt delivery.
I am totally inept at repairing things but this solved my dead carriage clock, rescued it. Thanks
Parts worked as advertised and arrived when stated.
The only problem I had was in fitting the mechanism to my clock body. The mounting shaft could have been a little bit longer (say 1/16th more) for my application.
I was doing a 1980’s camper renovation & really wanted to keep the original, but broken, wall clock with the logo on it. This mechanism is a perfect fit, was easy to install & works well.
The clock movement is keeping perfect time. I was not sure how to attach the minute hand so I emailed Bear Woods. Shelby got back to me quickly and explained how. Great service!
Easy to navigate website, good product and good delivery adds up to a very good experience for the customer. No problem at all to recommend Bear Woods Supply.
FINE real FINE...no hassle transaction, no problem ordering, shipping in perfect order and in time!!! nothing else to say but thank you very much
Clock movement works as advertised. Was able to use the original hands - clock is as it was when we originally purchased it many years ago.
perfect service , perfect product , perfect price ,,, couldn't be any better ,,,, unlike another unnamed site I dealt with previously !
I have not opened the package as my customer found the product was not needed, It was received on time, so I am happy.
I was able to order a variety of hands to go with the movements and the customer service was great. Thanks!
The Takane clock movements are very accurate, easy to assemble and mount. they are well worth the cost.
The first clock mechanism I received was defective but I received a replacement free of charges.
Very speedy delivery with quality products. I would deal with your company again. Good job.
Replaced old mechanism with the new one and it is working perfectly. No problems installing.
Order was received as promised and is performing as expected. Good Job. Would recommend.
Used to repair a clock. Fits perfectly and works perfectly
friendly over the phone detailed service
friendly over the phone detailed support
Working well,
Thank you
Perfect fit
Excellent
SpecificationsaDimensions: 2-1/8 inch x 2-1/8 inch x 5/8 inch thick
Overall Shaft Length: 9/16"
American I Shaft Diameter: 5/16 inch
Threaded Shaft Length: 3/16"
Runs on 1 (AA) Size Battery
Runs up to 4-7/8" Clock Hands
Fits 3 inch Diameter Hole or Flush Mount
Works with material up to 1/8" thick
Brass Washer
Hex Nut
Open End Nut
Hangers sold separately
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.65 |  |
|
| or Add an Endcap for $0.65 |  |
Mini Quartz Clock Movements for 1/8 inch thick dial face
These movements made in the US by Takane and work with hands under 5 inches long.
- Accurate Within 2 Minutes A Year
- 1 Year Warranty
- OK for outdoor use if sheltered from rain.
- American "I" Shaft.
Click just above on "Choose your hands" to choose your hands for this type of movement. There are about 25 free hand options available and many more for purchase.
Please note free hands are only available per each movement purchased and if not selected at time of purchase, there will be an extra shipping charge. Also note that hangers and the rubber washer are sold separately - find them at the same spot as where you choose your hands.
Need hands longer than 5 inches? Click here for high torque options
Reviews
Click Here to Write a Review | Explore all
AMAZING SERVICE
2016-10-18
Today I will be placing my forth order for 20 more clock mechanisms from Bear Woods Supply with 100% confidence that if there is any issue with the order, it will be dealt with immediately. Great company to purchase from. I make CD/DVD clocks with these mechanisms and they are going like hot cakes at craft shows in southern Ontario. These Movements come with everything I need except I have to purchase a larger washer as the centre hole in a printable CD/DVD case is too big for the washers included with these sets. Minor detail. With a great selection of clock hands in Black, White or Brass, you're sure to find the right combination for your project. To determine which size hands to get, measure from the centre of your clock face to where you would like the end of the hand to be. They can also be cut to length if you select the right style. The brass hands come with a protective plastic coating on them which is easily removed by simply taking a small piece of scotch tape, place it on the end of the hand and pull the very thin layer of plastic off. Another bonus - MADE IN USA - support north America. These movements can be found all over the place but you can't beat Bear Woods Supply Company for SERVICE. That is paramount.
Clock Movement
2016-04-08
I make clocks out of CD's by printing on the printable CD whatever the client wants. Because of the size of the CD hole, I had to purchase separate washers to hold the CD in place. Service was very fast and all clocks work great. The silver hangers that come with the clock, I paint black as it can be seen once item is fully assembled. The 1/8" thick clock dial is perfect to make a clock out of a CD. Very happy with products from Bear Woods - Highly recommended.
Delighted
2020-06-05
After struggling with purchasing the correct model of mechanism to repair an outdoor clock, I finally made my choice. It arrived within 2-days! I was unable to install the product. I called customer service with goal of exchanging my purchase. I was delighted because the agent guided me through the correct installation procedure and voilà, I had a functioning clock. Highly recommend them for clock parts.
replacement clock parts
2018-10-14
Project went well. There was enough information on the website to point the direction in both the necessary parts and how to install. Thank you!
The order process was simple and efficient. The whole project from conception to completion was done in a week! That speaks volumes about the attention to detail demonstrated by the supplier.
Super Happy - would order from again anytime
2020-03-03
Customer service was outstanding, with e-mails or phone calls at every turn of the order process, very genuine customer service. Would highly recommend them again. Going forward, their are my first stop in my search for items I order online. - Thank you
Clock Mechanisms
2018-11-07
Excellent product. I make clocks out of printable CD's/DVD's. A great Christmas gift idea. Delivery was before the scheduled time even during the rotating postal strike. You can't beat Bear Woods for customer service - the best I've ever experienced.
fast quick reliable
2019-08-24
Ordered replacement clock innards, works fine, very quiet, almost can't hear it ticking. Very pleased with prompt delivery.
I am totally inept at repairing things but this solved my dead carriage clock, rescued it. Thanks
reccent purchase
2017-05-29
Parts worked as advertised and arrived when stated.
The only problem I had was in fitting the mechanism to my clock body. The mounting shaft could have been a little bit longer (say 1/16th more) for my application.
Happy camper
2020-09-15
I was doing a 1980’s camper renovation & really wanted to keep the original, but broken, wall clock with the logo on it. This mechanism is a perfect fit, was easy to install & works well.
Happy Customer
2021-12-08
The clock movement is keeping perfect time. I was not sure how to attach the minute hand so I emailed Bear Woods. Shelby got back to me quickly and explained how. Great service!
Thank You
2018-05-07
Easy to navigate website, good product and good delivery adds up to a very good experience for the customer. No problem at all to recommend Bear Woods Supply.
No Hassle Transaction
2017-09-27
FINE real FINE...no hassle transaction, no problem ordering, shipping in perfect order and in time!!! nothing else to say but thank you very much
Good product
2020-06-25
Clock movement works as advertised. Was able to use the original hands - clock is as it was when we originally purchased it many years ago.
awesome
2018-10-14
perfect service , perfect product , perfect price ,,, couldn't be any better ,,,, unlike another unnamed site I dealt with previously !
happy
2022-07-03
I have not opened the package as my customer found the product was not needed, It was received on time, so I am happy.
Great selection
2015-04-24
I was able to order a variety of hands to go with the movements and the customer service was great. Thanks!
Very accurate
2020-06-28
The Takane clock movements are very accurate, easy to assemble and mount. they are well worth the cost.
Satisfied customer
2021-11-16
The first clock mechanism I received was defective but I received a replacement free of charges.
Clock mechanisms
2018-01-20
Very speedy delivery with quality products. I would deal with your company again. Good job.
Happy customer!
2023-03-27
Replaced old mechanism with the new one and it is working perfectly. No problems installing.
Satisfied
2020-07-23
Order was received as promised and is performing as expected. Good Job. Would recommend.
Clock mechanism
2019-05-20
Used to repair a clock. Fits perfectly and works perfectly
clock parts
2018-08-07
friendly over the phone detailed service
clock parts
2018-08-07
friendly over the phone detailed support
Clock motor
2018-08-22
Working well,
Thank you
happy customer
2022-12-22
Perfect fit
Clock device
2013-02-20
Excellent
Average rating:
27 reviews
Click Here to Write a Review | Explore all
Featured positive reviews:
Today I will be placing my forth order for 20 more clock mechanisms from Bear Woods Supply with 100% confidence that if there is any issue with the order, it will be dealt with immediately. Great company to purchase from. I make CD/DVD clocks with these mechanisms and they are going like hot cakes at craft shows in southern Ontario. These Movements come with everything I need except I have to purchase a larger washer as the centre hole in a printable CD/DVD case is too big for the washers included with these sets. Minor detail. With a great selection of clock hands in Black, White or Brass, you're sure to find the right combination for your project. To determine which size hands to get, measure from the centre of your clock face to where you would like the end of the hand to be. They can also be cut to length if you select the right style. The brass hands come with a protective plastic coating on them which is easily removed by simply taking a small piece of scotch tape, place it on the end of the hand and pull the very thin layer of plastic off. Another bonus - MADE IN USA - support north America. These movements can be found all over the place but you can't beat Bear Woods Supply Company for SERVICE. That is paramount.
I make clocks out of CD's by printing on the printable CD whatever the client wants. Because of the size of the CD hole, I had to purchase separate washers to hold the CD in place. Service was very fast and all clocks work great. The silver hangers that come with the clock, I paint black as it can be seen once item is fully assembled. The 1/8" thick clock dial is perfect to make a clock out of a CD. Very happy with products from Bear Woods - Highly recommended.
After struggling with purchasing the correct model of mechanism to repair an outdoor clock, I finally made my choice. It arrived within 2-days! I was unable to install the product. I called customer service with goal of exchanging my purchase. I was delighted because the agent guided me through the correct installation procedure and voilà, I had a functioning clock. Highly recommend them for clock parts.
Project went well. There was enough information on the website to point the direction in both the necessary parts and how to install. Thank you!
The order process was simple and efficient. The whole project from conception to completion was done in a week! That speaks volumes about the attention to detail demonstrated by the supplier.
Customer service was outstanding, with e-mails or phone calls at every turn of the order process, very genuine customer service. Would highly recommend them again. Going forward, their are my first stop in my search for items I order online. - Thank you
Excellent product. I make clocks out of printable CD's/DVD's. A great Christmas gift idea. Delivery was before the scheduled time even during the rotating postal strike. You can't beat Bear Woods for customer service - the best I've ever experienced.
Ordered replacement clock innards, works fine, very quiet, almost can't hear it ticking. Very pleased with prompt delivery.
I am totally inept at repairing things but this solved my dead carriage clock, rescued it. Thanks
Parts worked as advertised and arrived when stated.
The only problem I had was in fitting the mechanism to my clock body. The mounting shaft could have been a little bit longer (say 1/16th more) for my application.
I was doing a 1980’s camper renovation & really wanted to keep the original, but broken, wall clock with the logo on it. This mechanism is a perfect fit, was easy to install & works well.
The clock movement is keeping perfect time. I was not sure how to attach the minute hand so I emailed Bear Woods. Shelby got back to me quickly and explained how. Great service!
Easy to navigate website, good product and good delivery adds up to a very good experience for the customer. No problem at all to recommend Bear Woods Supply.
FINE real FINE...no hassle transaction, no problem ordering, shipping in perfect order and in time!!! nothing else to say but thank you very much
Clock movement works as advertised. Was able to use the original hands - clock is as it was when we originally purchased it many years ago.
perfect service , perfect product , perfect price ,,, couldn't be any better ,,,, unlike another unnamed site I dealt with previously !
I have not opened the package as my customer found the product was not needed, It was received on time, so I am happy.
I was able to order a variety of hands to go with the movements and the customer service was great. Thanks!
The Takane clock movements are very accurate, easy to assemble and mount. they are well worth the cost.
The first clock mechanism I received was defective but I received a replacement free of charges.
Very speedy delivery with quality products. I would deal with your company again. Good job.
Replaced old mechanism with the new one and it is working perfectly. No problems installing.
Order was received as promised and is performing as expected. Good Job. Would recommend.
Used to repair a clock. Fits perfectly and works perfectly
friendly over the phone detailed service
friendly over the phone detailed support
Working well,
Thank you
Perfect fit
Excellent
Specifications
SpecificationsaDimensions: 2-1/8 inch x 2-1/8 inch x 5/8 inch thick
Overall Shaft Length: 9/16"
American I Shaft Diameter: 5/16 inch
Threaded Shaft Length: 3/16"
Runs on 1 (AA) Size Battery
Runs up to 4-7/8" Clock Hands
Fits 3 inch Diameter Hole or Flush Mount
Works with material up to 1/8" thick
Brass Washer
Hex Nut
Open End Nut
Hangers sold separately
Hardware Included
Optional Hardware
| Add an Black Endcap for $0.65 | |
|
| or Add an Endcap for $0.65 | |
Customers also looked at:
Add to Cart
Nail-less Sawtooth Picture Hangers 1" by 5/16" for hardwood frames (Per 100 Hangers)
Average rating:
CAD $9.97
