It's important to note that this Saw weighs over 150lbs (pounds) and we advise customers to have someone available to assist with the delivery.
Shipping will come to a total of $180 to $300 depending on your proximity to New Jersey. For the bandsaw only, you won't be charged any shipping originally, so please pay what is asked at checkout. When your saw is ready to ship, we'll be in touch to collect the freight charge based on your actual shipping rate.
The Pégas® Scroll Band Saw is a precision machine using Pégas® Scroll Band saw blades, the finest and most accurate blades ever produced.
This unique and innovative concept is intended for informed users, from hobbyists to skilled professionals.
The Pégas® Scroll Band Saw was developed in Switzerland and made in Taiwan to Pégas®specifications and quality requirements
- Heavy-duty cast iron frame for higher longevity and stability
- Precision-balanced aluminum wheels to avoid vibrations
- Long-lasting armid (similar to Kevlar) tires for durability
- Two speeds settings allow you to cut wood or soft metal—Using the same blade (Note: cutting metal will wear out the blade faster than cutting wood).
- Blade protection guard to keep your fingers away from the sharp blade
- Heavy-duty cast iron table with a 40° tilting capability one way, and 10° tilting capability the other way
- Highly efficient dust collection system located directly under the work table for optimal suction and collection.
- The Pégas® Scroll Band Saw has been certified CE by TÜV Rheinland
- 1 each #9 band saw blade
- 1 each #12 band saw blade (installed)
- The Pégas® Precision Guide System including top and bottom Pégas® Precision blade guides (see below)
- Pégas® Universal Bearings that accommodate the #9, #11, and #12 blades
- The Pégas® Scroll Band Saw Stand, designed to support the saw and put it at the optimal position for most users
- Instruction manual
NOTE: The Pégas® Scroll Band Saw sold in North America does not include the LED light mentioned in the owner’s manual.
The Pégas® Precision Guide System allows you to use band saw blades as small as a #5 scroll saw blade (1mm or 1/32” wide).
The guide system supports the bearings that support the blades.
Each pair of bearings (one on top and one on the bottom) feature slots precision machined to match the width and optimal depth for each blade size.
The slots are deep enough to support the blade without damaging the alternating set on the blades.
When you change blade sizes, you must change the bearings. You cannot use the Pégas® Band Saw Blades on any other saw.
The precision guide system allows you to cut complex shapes and tight circles in wood up to 6” (150mm).
More blades? Yes, we have them. Here's helpful info below.
| Size | Approx. Fractional Inch (mm) | Blade Width decimal inch | Blade thickness inch (mm) | Cutting Trace inch (mm) | TPI |
|---|---|---|---|---|---|
| 5 | 1/32” (1) | 0.0402 | 0.0142 (0.36) | 0.0157 (.040) | 13.4 |
| 7 | 3/64” (1.25) | 0.0488 | 0.0157 (0.40) | 0.0181 (0.46) | 11.8 |
| 9 | 1/16” (1.5) | 0.0527 | 0.0173 (0.44) | 0.0204 (0.52) | 10.5 |
| 11 | 5/64” (1.8) | 0.0709 | 0.0197 (0.50) | 0.0244 (0.62) | 9.2 |
| 12 | 3/32” (2) | 0.0787 | 0.0197 (0.50) | 0.0248 (0.63) | 8.9 |
| 14 | 1/8” (3) | 0.1181 | 0.0197 (0.50) | 0.0256 (0.65) | 8.2 |
The floor footprint is 21" x 27", and the table is 41" off the ground.
The manual suggests a space of 28" x 32" to be able to use the saw comfortably.
Specialty Order Dowels are Made To Order. Allow a lead time of 1-4 weeks. We'll let you know if it is longer (which can happen based on raw materials you have chosen and quantity purchased.
Tolerances are +/-0.01" on the diameter, and +/-1/32nd" on the length.
2 year parts warranty.
Service directly from the manufacturer via their office in New Jersey, USA. Need support on the saw? We'll provide you with contact information to speak to trained service staff who also has the support of a highly trained technician. From time to time a part will need servicing beyond what we can help with by phone and sending parts. In those cases, we'll arrange for the saw to be sent to New Jersey.
The band saw ships with the #12 installed. It goes in the left groove in the top bearing and the right groove in the bottom bearing. To use the #9 blade, remove and flip the so the other blades will go in the other machined slots.
Learn Band Saw setup with Jeff Vollmer. Jeff is a world-renowned author and annual instructor on making bandsaw boxes at the Marc Adams School of Woodworking.Learn How to Set Up The Bandsaw when it arrives at your door.
Demonstration Videos:
Contact 
Help
Home
Wishlist
Account
Cart