/>
  • Clearance
  • About Us | FAQ
  • Contact
Bear Woods Supply Logo Wood Craft Parts
Shopping Cart | Checkout ()

Damaged Clock Hands for High Torque Motors - 10" Tapered Style Black

Our Product Code: QH-76DMG
Quantity: 
 
Checkout/Estimate Shipping
Share Share 
on Facebook Share on Pinterest

Damaged Clock Hands for High Torque Movements in 10" Black, Tapered Style

These clock hands are slightly damaged but still in great working condition! When ordered, you will receive a set that is either slightly bent or scratched.

Shop for USA Made Clock Hands to go with the more powerful high torque clock motors.

Tips for making larger wall clocks:

1. Second hands not included - we don't recommend second hands with high torque movements as they draw too much power.  

2. Want a second hand? - choose our balanced 10 inch red or black second hands that work with our Continuous Sweep (Silent High Torque Motors.

3. High Torque (High Power) Clock Movements to drive hands larger than 5 inches are sold separately.  Click here for the selection.

4.  These hands can be trimmed to a shorter length if you keep the hand balanced. (just put the mounting hole of the minute hand on your fingertip to check the balance) They can be spray painted another colour.

⇓ Scroll Down for Clock Motors and Accessories ⇓ ⇓ Choose Silent Sweeping Motion, or Step Motion,  or Chime/Pendulum Motors ⇓
High Torque Clock Motors are more powerful than standard/mini motors - made specifically to handle the extra weight of longer clock hands up to 18" in length. Standard/Mini movements run clock hands less than 5 inches long. 

how to choose clock movements and hands

How do I choose the right size clock motor & hands? 
1) Refer to the figure here, or Click Here for helpful info (a new window or tab will open)  

2) The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4) 

3) Our clock motors are sized by the thickness of the dial the movements can go through.  EG. High torque Q-64 will go through up to 5/8" thick material, while standard/mini motor Q-11 will go through 1/8" thick clock faces. (Figure 1 and  item "A" in Figure 2)


Tip 1)  If your material is too thick, consider removing some to in-set the clock.  Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face. 

Tip 2) Most hands can be slightly trimmed if need be.

Tip 3) Our customers also spray paint them. 

Check out some other popular items!